Best Metal Hole Saws
The best metal hole saws are matched to the exact metal, hole diameter, material thickness, drill, and cutting conditions. A hole saw is a cylindrical cutter with a toothed or abrasive rim that removes a round plug while leaving a circular opening. It can make a large hole in sheet metal, pipe, duct, or other compatible stock without drilling away the entire center. The convenience has limits: the wrong tooth material, excessive speed, a loose workpiece, or a binding cutter can damage the tool and cause the work to spin.
This guide focuses on hole saws for metal. It distinguishes bi-metal and carbide-tooth designs from carbide-grit or diamond-grit cutters intended for different materials. It explains how to choose diameter, teeth, pilot bit, arbor, speed, and cutting fluid, and how to set up the work safely. It is not a hands-on product test. We did not cut sample metals, compare brands in a shop, or verify current prices. Product instructions vary, so use the exact hole saw, arbor, and drill manuals as the controlling source for limits and operating details.
Hole saws are not the same as large metal-cutting chop saws or circular saws. If your job is cutting stock into lengths, see our chop saw guide or circular saw guide for the relevant tool category. For cutting wood panels and boards rather than making one round opening, our table saw guide explains a different kind of cut.
Affiliate disclosure: This article may contain affiliate links. If you buy through one, DailyHomeDecorating.com may earn a commission at no extra cost to you. Product selection should still be based on the material, tooling compatibility, safe setup, and verifiable manufacturer information.
Amazon product examples to compare

ASIN: B086SQWZK5

ASIN: B0F28ZQKC2

ASIN: B0H5BB4D8X

ASIN: B08YGFGRBX
Certain content that appears on this site comes from Amazon. This content is provided “as is” and is subject to change or removal at any time. Product examples and images are supplied through Amazon Creators API; confirm specifications and availability on the current listing.
Quick answer: choose for material and setup first
For common holes in mild steel and aluminum, a compatible bi-metal hole saw is often a practical starting category. For repeated work, demanding materials, stainless steel, or longer service life, compare metal-rated carbide-tooth options and read the maker’s material chart. Do not assume every product labeled “metal” is suitable for stainless steel. The workpiece material and thickness, hole diameter, arbor rating, available speed control, cutting fluid, and ability to clamp the stock all affect the choice.
Before buying, identify the alloy if possible, measure the required finished diameter, and confirm the hole saw’s cutting depth. Check that the arbor accepts that diameter and matches your drill or press. Then find the manufacturer’s speed and lubrication instructions for that material. If you cannot hold the work securely or control the tool, use a more suitable machine or ask a qualified metalworker for guidance.
What a metal hole saw does
A hole saw cuts around the perimeter of a circle, leaving a cylindrical slug or “plug” in the center. Its annular cut can remove less material than a large twist drill, but it still has substantial contact with the work and can grab if the teeth bind. A pilot bit normally centers the cutter and begins the hole; the arbor connects the saw cup to a drill chuck or other drive. Some systems have integrated or quick-change arbors and different pilot arrangements.
The cup’s size determines the nominal hole diameter, while its depth determines how thick a single-sided cut it can make. A deep cup does not necessarily mean the same maximum usable cut in every material: chip evacuation, slug removal, arbor geometry, and the cutter’s design matter. For stock too thick for the listed depth, the manufacturer may describe cutting from both sides, but that requires accurate alignment and a safe method. Do not improvise a through-cut based only on the cup’s appearance.
A hole saw is useful for wiring and plumbing openings, access holes, mounting penetrations, and fabrication tasks when the material and cutter are compatible. It is not a drill bit for every metal operation, and a hand drill is not automatically the right drive for every diameter. Large cutters create higher reaction forces. Match the tool to the cutter and follow the tool’s manual.
Start with the metal, not the brand
Mild and low-carbon steel
For many general-purpose holes in mild steel, a bi-metal saw with teeth intended for metal is a common option. Confirm the manufacturer’s chart for the exact product and the stock thickness. Mild steel is not one uniform condition: sheet, tube, plate, coated stock, and hardened pieces behave differently. A hole saw suitable for thin sheet does not automatically suit thick plate or a high-strength steel component.
Thin sheet can flex, vibrate, or catch the teeth. Secure it against a firm backing surface where the setup permits, protect the finish if needed, and avoid creating a setup that traps the slug or allows the sheet to spin. A backing board should not be treated as permission to put hands close to the cutter. Clamp the work and support it in a way appropriate to the drill and material.
Stainless steel
Stainless steel can be more demanding than ordinary mild steel. Some stainless grades work-harden when rubbed or cut with insufficient feed, dull teeth, excessive heat, or repeated dwelling. A cutter that is marketed for general metal may not have stainless steel in its approved list. Choose a hole saw explicitly approved for the specific stainless task and follow its recommended speed, pressure, and cutting-fluid guidance.
Do not infer stainless capability from “bi-metal,” “high speed steel,” or a similar label alone. Manufacturers distinguish products by tooth design, hardness, coating, geometry, and intended use. The Milwaukee hole-saw selection guide illustrates that the recommended materials differ by hole-saw category; its chart marks bi-metal and carbide-tooth products differently for stainless steel. That guidance applies to the listed Milwaukee products and should not be generalized to every brand.
Aluminum and other nonferrous metals
Aluminum is softer than steel, but its chips can adhere to cutting edges and its stock can be thin and flexible. Verify the saw is rated for aluminum, and use the manufacturer’s recommended speed and lubrication. Clean chip evacuation matters. A hole saw that cuts aluminum may also be listed for copper or other nonferrous materials, but do not assume the entire category shares the same settings.
Cast iron and coated stock
Cast iron can be brittle and abrasive, and its suitability depends on the cutter and application. Coated, galvanized, painted, or plated stock introduces additional concerns: the coating may affect the cutting process, and dust or fumes may require separate controls. Check the product guidance and the material safety information. If a coating’s composition is unknown, do not cut it until you understand the hazards and appropriate protection.
Pipe, tubing, and curved surfaces
Round stock tends to roll and offers less initial contact than a flat plate. A hole saw can walk or catch if a tube is not held in a suitable fixture. Use equipment designed to secure the stock, and consider whether a drill press, magnetic drill, or specialized fixture is appropriate. Never grip round tubing by hand while a powered cutter is engaged. Ensure that a through-hole will not cut into a hidden cable, fluid line, or other component.
Bi-metal, carbide-tooth, carbide-grit, and diamond-grit
Bi-metal tooth hole saws
Bi-metal hole saws typically combine a flexible body with a harder toothed cutting edge. They are widely used for general-purpose applications and can offer a balance of availability and versatility. The precise tooth material, geometry, and approved metals differ by model. Their ability to cut metal does not prove that they are suitable for every steel grade, thickness, or production workload.
Look for the manufacturer’s intended-material list, not only the package headline. Check the tooth form and any stated limit. For occasional holes in mild steel or aluminum, the basic range may meet the need; for repeated holes or difficult alloys, a more specialized cutter may be appropriate. Compare the cost of the cup with the expected number and type of holes rather than assuming a set with many sizes is the best value.
Carbide-tooth hole saws
Carbide-tooth designs use hard cutting elements and may be intended for a wider or more demanding material range, including stainless steel on specified products. They may cost more, and their recommended speeds, feeds, and work conditions are product-specific. Carbide is hard but can be damaged by impact, chatter, misalignment, or incorrect use. A carbide cutter is not invulnerable and still requires secure work and appropriate technique.
Compare manufacturer selection charts before choosing between bi-metal and carbide teeth. Milwaukee’s published catalog describes its carbide-tooth hole saws as intended for a list of general and more challenging materials, including stainless steel; that statement is tied to its named product family. A different manufacturer’s carbide product may have different limits. Verify the exact SKU’s current documentation.
Carbide grit and diamond grit
Grit-edged hole saws abrade rather than cut with conventional discrete teeth. They are typically used for selected nonmetal materials such as tile, cement board, glass, or masonry, depending on design. They are not a universal substitute for metal-cutting toothed hole saws. A diamond-grit cup may cut some materials that a toothed metal cup cannot, but it may be unsuitable for steel. Use the product’s material chart and cutting method.
Why “multi-material” needs scrutiny
Multi-material labels can be useful shorthand, but they do not mean “safe for everything.” Different materials create different chips, heat, loading, and hazards. A product page or catalog should state the materials it supports, and the manual should describe operating conditions. If the exact metal is absent from the approved list, contact the manufacturer rather than guessing.
Tooth pitch: what teeth per inch tells you
Teeth per inch (TPI) is one way to describe tooth spacing. Fine-pitch blades place more teeth in contact with thin material, which can make them more appropriate for some thin-wall applications. Coarser tooth forms have fewer, larger gullets and can clear chips differently in thicker material. The right pitch depends on material thickness, cutter design, and maker guidance; “more teeth” is not inherently better.
When the stock is too thin for the tooth spacing, the teeth may catch rather than engage smoothly. When it is too thick or the gullet is too small for the chips, cutting may slow and heat may increase. Hole-saw makers often specify TPI or tooth design for a product family, but the number alone is not enough to select a cutter. Use the material chart and recommended thickness range where provided.
Tooth condition is equally important. Dull, chipped, or missing teeth increase friction and can make the cutter wander or bind. Inspect the rim before each job. Do not continue if teeth are damaged, and do not sharpen a cutter unless the manufacturer provides a suitable procedure. Replace a worn cutter rather than applying more force.
Choose the diameter and cutting depth precisely
Measure the required hole from the component that must pass through it. Account for any grommet, sleeve, conduit, fitting, clearance, or finishing trim. Hole saw sizes are commonly expressed in inches or millimeters, and product sets may use one unit system or both. Avoid relying on a package photograph or a rounded listing title; check the actual size marking and drawing.
For a clean, accurate opening, make a test hole in scrap of the same material and thickness when practical. This verifies diameter and reveals whether the chosen cup and process leave an acceptable edge. It also helps establish a safe setup before working on an expensive finished panel. Deburring may be required after cutting; choose a suitable deburring tool and use it after the cutter stops and the work is secured.
Compare the saw’s cutting depth with the full thickness of the work. The arbor and pilot bit also need sufficient projection, and the slug must have room to clear. If the depth is inadequate, consult the maker’s method for cutting both sides or use a different cutter or machine. Blindly forcing the cup until the arbor bottoms out can damage the tool and leave an unsafe, incomplete cut.
Arbors, pilot bits, and drill compatibility
The arbor holds the cup and pilot bit. A hole saw may be sold alone or as a set, while the arbor may be sold separately. Confirm that the arbor thread or quick-change interface matches the cup, that it is rated for the cup’s diameter, and that its shank fits the drill chuck or machine. Large hole saws can exceed the safe capacity of some hand drills or chucks even when the shank physically fits.
The pilot bit helps locate the center and can stabilize the initial engagement. Check whether the arbor accepts the supplied pilot, whether it can be replaced, and whether the pilot material and geometry suit the metal. Some systems allow a pilot bit to be changed or removed; any such change must follow manufacturer directions. A blunt or unsuitable pilot can wander, generate heat, or fail to start cleanly.
Arbor compatibility is easy to overlook when purchasing a cup from one range and a mandrel from another. Match the product family, thread, diameter range, and machine rating. Ensure that the arbor is fully seated and secured, and inspect it for damage. Don’t use improvised adapters or a worn arbor to make incompatible parts fit.
Drills vary in speed, torque, clutch behavior, side-handle availability, and control. A small cordless drill may be unsuitable for a large cutter. Some large-diameter or repeated metal applications call for a drill press or magnetic drill, but those machines introduce their own hazards and setup requirements. Read the machine manual. Do not hold a powered drill loosely and assume a low-speed setting will prevent reaction torque from injuring your wrist.
Speed, feed pressure, and lubrication
Hole-saw speed depends on cutter diameter, tooth design, metal type, thickness, and machine. Larger diameters generally require lower rotational speed than smaller cutters, but the safe setting must come from the hole-saw and drill manuals. A chart from a manufacturer can offer starting guidance for its products; it is not automatically transferable to a competing cutter or another alloy.
Use steady, controlled feed pressure. Forcing a cutter can overload teeth, overheat the rim, stall the drill, or cause a sudden grab. Too little pressure or dwelling in one spot can also create heat, especially in alloys that work-harden. Let the tool cut without leaning your full weight onto it. If progress changes abruptly, stop and investigate rather than simply pressing harder.
Cutting fluid can reduce friction and heat for metal applications, but use a lubricant suitable for the workpiece and cutter and follow the manufacturer’s directions. Different steels, aluminum, and stainless grades may call for different cutting fluids. Keep fluid away from electrical parts and avoid products that create a fire, health, or cleanup hazard in your environment. A lubricant is not a substitute for correct speed, sharp teeth, or chip removal.
Metal chips can be sharp and hot. Stop the machine before clearing swarf or the slug, and use a brush or tool rather than bare fingers. Avoid gloves around rotating machinery because material can catch and pull the hand into the tool. OSHA drill-press guidance emphasizes securing material and keeping clear of rotating components; follow applicable workplace rules and the machine manual.
A buying framework for metal hole saws
- Identify the alloy and form. Know whether the work is mild steel, stainless steel, aluminum, cast iron, sheet, tube, or another material. If unsure, investigate before cutting.
- Specify the hole. Record the required diameter, tolerance, stock thickness, and whether the cut is through or blind.
- Select the tooth material. Compare bi-metal and carbide-tooth products against the maker’s chart for the exact metal. Choose grit or diamond only when the material calls for it.
- Verify tooth design and depth. Check TPI or the stated tooth geometry, approved thickness, and maximum cutting depth.
- Check the arbor system. Confirm cup size range, arbor connection, pilot bit, shank, and drive-machine rating.
- Plan speed and fluid. Find official recommendations for the cutter and work material before starting.
- Plan work holding. Decide how the work will be clamped, supported, and kept from spinning without placing hands near the cut.
- Compare a set with individual cups. Buy the sizes you will use. A large assortment may contain many cups that do not match your material or project.
- Review replacement availability. Confirm that compatible pilot bits, arbors, and individual saws are available if a part wears out.
This method helps avoid selecting by brand name alone. For occasional DIY work, a few correct sizes and a compatible arbor may be more useful than a large mixed set. For production work, repeated holes, or a high-value component, ask the manufacturer or tooling supplier about suitable cutters and process settings.
Research method and authoritative sources
This guide is based on manufacturer product and selection documentation and OSHA drill-press safety guidance. It is not a comparative laboratory test. We did not claim to measure tool life, speed, hole finish, or performance. Because brands use different tooth geometries and publish their own material ratings, the article treats material compatibility as model-specific.
Milwaukee’s hole-saw selection chart compares listed categories such as bi-metal, carbide teeth, carbide grit, and diamond grit across stainless steel, metal, aluminum, and other materials. Its chart demonstrates why “hole saw” alone is not enough information to determine material suitability. Consult the current chart for the exact product line you intend to use.
For an example of product-specific claims, see the Milwaukee HOLE DOZER bi-metal saw page, which lists its stated applications and cutting depth for that named saw. The dimensions and materials on that page do not apply to every saw in the product family or to every brand. Verify the specific diameter and current documentation.
OSHA’s drill-press guidance describes hazards from rotating chucks and stock that can spin when held by hand, and recommends appropriate guarding and work holding. OSHA also provides a drill-press training script that emphasizes clamping material, using a chip guard, and not reaching near rotating tools. These pages are safety references, not a replacement for the machine’s manual or formal training.
Safe setup and cutting workflow
Inspect and isolate before assembly
Disconnect the drill from power or remove its battery before installing the arbor or changing the cup. On a drill press, follow its isolation procedure. Check the saw teeth, arbor threads, pilot bit, shank, chuck, and machine for damage. Make sure each part is compatible and tightened according to its manual. Wear eye protection and other protective equipment required for the material. Tie back long hair, remove jewelry, and avoid loose clothing.
Secure the workpiece
Clamp the material using suitable work-holding equipment. Never rely on your hand to resist the torque of a hole saw. A drill press table, vise, fixture, or backing may be needed depending on the shape and size. Round stock requires a fixture that prevents rolling. Check that the clamp cannot collide with the cutter and that the part cannot rotate, lift, or slide when the saw engages.
Mark, support, and clear the back side
Mark the center accurately and make sure the pilot can reach it. Check both sides for obstructions, hidden wires, fluid lines, and clearance for the plug. Support thin sheet flat and securely without trapping it. Make sure the emerging slug will not fall into a mechanism or strike someone. Keep bystanders out of the line of possible chips and workpiece movement.
Choose a controlled tool position
Hold a hand drill with a stable stance and use an auxiliary handle if the tool provides one and the manual recommends it. A drill press may improve perpendicularity, but the work still must be clamped and the guard used as intended. Set a suitable speed before cutting, using the manufacturer’s guide. Do not wear gloves while operating rotating machinery; gloves can catch in the chuck or cutter.
Start and cut deliberately
Position the pilot at the mark and begin at the setting prescribed by the manufacturer. Keep the cutter aligned and apply even pressure. Do not rock the cup or twist the drill to force progress. If the saw chatters, binds, smokes, or stops cutting normally, switch off power and wait for all motion to stop. Disconnect power before correcting the setup, clearing chips, or removing a jammed slug.
Finish and deburr
After the cut, stop and wait until the cutter is fully stationary. Remove chips and the slug with an appropriate tool after isolating the machine. The cut edge may be sharp. Deburr with a suitable tool while the work is securely supported, and protect the surface from chips and lubricant. Inspect the hole and workpiece for cracking, distortion, or damage before installing a fitting.
Common problems and what to check
The saw heats up quickly
Possible causes include an unsuitable speed, dull teeth, too much or too little feed, inadequate lubrication, chip packing, or a material mismatch. Stop and allow the setup to cool. Verify the maker’s speed and fluid recommendations and inspect teeth. Do not continue simply because the cutter has already started the hole.
The cutter grabs or the drill twists
Stop using the tool. The work may not be secure, the cutter may be misaligned, or a tooth may be binding. Large hole saws can generate substantial reaction torque. Never counteract a grab by gripping the work harder with your hand. Reassess the clamp, tool size, arbor, and drive machine, and get experienced help if needed.
The hole is rough or off-center
Check the pilot bit, cutter condition, marking, work restraint, drill alignment, and material support. Thin stock can flex and vibrate. Make a test cut in scrap, confirm the correct diameter, and verify that the cutter is appropriate for the alloy and thickness. Do not expect a hole saw to provide a finished precision bore without follow-up operations.
The slug is stuck inside the cup
Disconnect power and wait for the cutter to stop before removing the slug. Use the access slots or extraction method described by the manufacturer. Keep fingers away from teeth, which may remain sharp. Do not restart the drill with a tool inserted into the cup to pry the plug loose.
Maintenance and storage
Clean metal chips and suitable lubricant residue from the cup and arbor after use. Use a brush or other safe method while the cutter is disconnected. Inspect the teeth and body for wear, cracks, missing segments, or deformation. Replace damaged parts. Keep the cup dry and protect cutting edges from impact. Store each size so that teeth cannot strike other tools or injure someone reaching into a box.
Check pilot bits for wear and replace them with the correct type. Inspect arbor threads, locking mechanisms, and shanks for damage. Keep the drill chuck clean and confirm it grips the arbor securely. Follow the drill and hole-saw manuals for lubrication of the machine, service intervals, and cleaning products; do not apply oil to electrical parts or a surface that must remain dry for safe handling.
Record the sizes and materials for which a cutter has been used if the shop has multiple users. This can help prevent a cutter intended for a different material from being selected by mistake. Keep product packaging or a link to the current manufacturer data so that material ratings and speed recommendations can be checked later.
Frequently asked questions
What type of hole saw is best for metal?
It depends on the metal and the product rating. Bi-metal saws are common for general-purpose metal cutting, while carbide-tooth models may be recommended for certain demanding metals, including stainless steel in some product lines. Confirm the specific material list, thickness, and method in the manufacturer’s documentation.
Can a bi-metal hole saw cut stainless steel?
Some products may be rated for some stainless applications, while others are not. Do not rely on the bi-metal label alone. Check the exact manufacturer’s selection chart and instructions for the stainless grade and application. Use its recommended speed, feed, and lubricant.
Are carbide hole saws better than bi-metal?
Neither category is universally better. Carbide teeth can be useful for particular materials and workloads, while bi-metal saws may be suitable for common general-purpose tasks. Compare approved materials, size availability, depth, cost, and machine compatibility. Carbide teeth can also be damaged by impact or poor alignment.
Can I use a hole saw in a regular cordless drill?
Only if the drill’s manual and the hole-saw system allow the diameter and application. Large cutters can create strong reaction forces and may need a more suitable drill with an auxiliary handle or a drill press. Check the speed range, torque, chuck capacity, and arbor rating. If unsure, consult the tool manufacturer.
Do metal hole saws need cutting oil?
Many metal cutting tasks benefit from a suitable cutting fluid, but the exact recommendation varies with metal and cutter. Follow the hole-saw manufacturer’s guidance. Choose a product suitable for the alloy and your work environment, and keep liquids away from electrical components.
What speed should I use?
There is no single safe RPM for every hole saw. Speed depends on diameter, tooth design, material, and machine. Use the current chart or manual for the exact cutter. Larger diameters generally call for slower speeds, but use the published recommendation rather than a universal rule of thumb.
Why does a hole saw bind in metal?
Binding can result from workpiece movement, misalignment, packed chips, a dull cutter, unsuitable speed, excess pressure, or the slug pinching the cup. Stop the machine, isolate power, and correct the cause. Never pull a running cutter free by twisting the drill or holding the stock by hand.
Can I cut a hole in a metal pipe with a hole saw?
Only if the saw and setup are appropriate for the pipe material and geometry. Round stock must be held in a fixture that prevents rotation, and the cutter must engage the curved surface safely. A drill press or specialized machine may be more appropriate. Do not hold pipe by hand during powered cutting.
Should I buy a hole-saw kit or individual sizes?
Buy the sizes you need for known tasks. A kit can be economical if it includes the right diameter range, tooth type, arbor, and pilot bits for your material. An assorted kit with the wrong material ratings is not useful value. Check replacement availability and included components before purchase.
How do I choose among the best metal hole saws?
Identify the alloy and thickness, set the required diameter and depth, choose an explicitly compatible tooth type, verify the arbor and drill, and plan speed, lubrication, and work holding. Then compare only products whose manufacturer documentation supports the intended job. This process is more dependable than selecting a cutter by a broad “metal” label.
Final buying perspective
The best metal hole saws are the ones rated for your material and compatible with a properly controlled drive system. Mild steel, stainless steel, aluminum, cast iron, and thin sheet do not present identical cutting conditions. Use the maker’s material chart, confirm depth and diameter, and match the arbor, pilot, speed, and fluid to the job. Above all, clamp the work so it cannot spin, keep hands away from rotating parts, and stop to investigate unusual heat, chatter, or binding. A hole saw is a focused tool; the right choice begins with the exact hole and the exact metal.