Skip to content
RESEARCH-BASED GUIDES. PRACTICAL EVERYDAY ADVICE.How we pick products
DHDDaily Home DecoratingIdeas for a more welcoming, capable home
Home & DIY

Best Reciprocating Saws: How to Choose a Saw for Demolition and Rough Cuts

Compare corded and cordless reciprocating saws, blades, stroke, speed control, vibration, and safety for remodeling, plumbing, and outdoor cutting.

We may earn a commission from qualifying purchases. How we pick products

Where to buy

Check the latest price, availability and delivery on Amazon. Orders are placed on Amazon. We may earn a commission from qualifying purchases.

See 2 more Amazon options
  • RYOBI ONE+ 18V Cordless Reciprocating Saw - 3,400 SPM Variable Speed, 1 in. Stroke Length, Tool Only (Battery Not Included) - PCL515B View on Amazon
  • DEWALT 20V MAX Reciprocating Saw, 3,000 Strokes Per Minute, Variable Speed Trigger Cordless Saw, Tool Only (DCS380B) View on Amazon
Read the full guide ↓


Best Reciprocating Saws: How to Choose a Saw for Demolition and Rough Cuts

The best reciprocating saws help with cuts where speed, access, and versatility matter more than a furniture-ready finish. A reciprocating saw can cut wood, some metal, plastic pipe, and mixed demolition material when fitted with the correct blade. Its narrow blade moves back and forth, so it can reach into a wall opening, cut close to a floor, or remove a branch without needing the clearance of a circular saw. That flexibility makes it a useful remodeling and maintenance tool, but blade choice, control, and preparation matter.

There is no single reciprocating saw for every job. A corded model may suit long sessions near an outlet, while a cordless saw is easier to carry around a house or yard. A compact, one-handed model can fit tight spaces but is not automatically easier to control. A full-size tool may feel steadier for heavier cutting but bulky overhead. Decide what you cut, how long sessions last, whether you need access in confined spaces, and how close you work to hidden utilities before comparing features.

This guide explains power, stroke, speed controls, vibration, shoe adjustment, blades, setup, safe cutting, maintenance, and common buying mistakes. Reciprocating saws are intended for rough cutting, pruning, and demolition. For clean, repeatable trim crosscuts, see our guide to miter saws; for outdoor limbs and firewood, a dedicated battery chainsaw for homeowners may be more suitable. Our pole saw guide covers overhead branch work where keeping both feet on the ground is useful.

Affiliate disclosure: DailyHomeDecorating.com may earn a commission from qualifying purchases through links in this article. This does not change the price you pay.

Amazon product examples to compare

Certain content that appears on this site comes from Amazon. This content is provided “as is” and is subject to change or removal at any time. Product examples and images are supplied through Amazon Creators API; confirm specifications and availability on the current listing.

What a reciprocating saw does well

A reciprocating saw uses a motor to move a long, narrow blade in a linear push-and-pull motion. The blade projects forward from the body, and the operator guides the shoe against the material when possible. It can make straight, curved, or plunge-style cuts depending on the blade, material, and tool instructions. Its value is access: it can cut in places where a circular blade or fixed saw cannot easily fit.

Common uses include removing wall framing, cutting nails or screws during remodeling, shortening suitable plastic pipe, removing old trim, cutting openings in approved materials, trimming accessible branches, and dismantling pallets or bulky items. In demolition, a long blade can cut through a board while severing fasteners behind it. In plumbing, a suitable metal or plastic blade can shorten accessible pipe. In the yard, a pruning blade can remove a limb when the material is stable and within the tool maker’s guidance.

The cut is often rough. A reciprocating saw can wander if the blade is long, dull, unsupported, or pushed too hard. It is not usually the first choice for finish carpentry, cabinetry, or accurate mitered joints. When appearance and repeatability matter, choose a tool designed for the cut. For a small amount of hand-cut pruning, compare our guide to hand saws for gardening, while recognizing that those are a different category from woodworking saws.

Projects where it can be useful

  • Demolition of framing, subfloor sections, or old fixtures after hidden services are located and a safe cut plan is made.
  • Cutting nails or screws that hold material in place, with a blade designed for metal and the material combination.
  • Shortening approved PVC, plastic, or other accessible pipe.
  • Rough trimming of branches that can be secured and reached safely from stable footing.
  • Cutting wood, metal, or mixed material during renovation with the correct blade and controlled technique.
  • Making a plunge cut only where the manufacturer permits it and the space behind the surface is confirmed clear.

A tool being able to cut a material does not mean every cut is safe. Electrical wiring, plumbing, gas lines, insulation, masonry, and structural components can be hidden behind surfaces. Before demolition, identify what is on the other side, isolate utilities when appropriate, and get qualified help when the layout or structural role is uncertain.

Reciprocating saw styles

Full-size reciprocating saw

A full-size reciprocating saw is built for a two-handed grip and frequent, heavier work. It commonly offers room to hold the rear handle and front housing. The additional size can provide useful control, although it may also make the tool harder to maneuver in a confined cabinet, crawl space, or overhead position. Compare balance with the battery installed, not only bare-tool weight.

For remodeling and demolition, a full-size saw can be a good general option if you have space to brace it and maintain a secure grip. The shoe should rest against the work when possible. If the tool is too large to position without twisting your wrists or leaning into an unstable stance, choose another tool or reset the work.

Compact and one-handed models

Compact saws fit tighter work areas and are easier to carry. Some are designed to be held primarily with one hand. That form factor can help with quick service work, smaller pruning, or cuts where a full-size body cannot fit. However, one-handed use reduces the opportunity to brace and guide the saw. A smaller tool does not remove kickback risk or make awkward overhead cutting safe.

Check the manufacturer’s instructions for grip positions and applications. Consider the saw with its battery attached, plus the reach needed to place the shoe. If most of your tasks involve heavy demolition, a two-handed design may provide better leverage and steadier control.

Corded models

A corded saw delivers power continuously while connected to an appropriate electrical supply. It can suit long sessions in a shop or renovation area with a suitable outlet. You do not need to manage battery charge, but the cord can limit movement, catch on debris, or create a trip hazard. Route it away from the blade, water, sharp edges, and foot traffic. Use the cord and outlet configuration specified by the tool maker.

Think about where you work, not only where you store the saw. A corded model is less convenient when moving around a property, climbing stairs, or working outdoors far from a power source. In damp environments, additional electrical precautions may apply; follow the manual and local safety rules rather than improvising.

Cordless models

A cordless saw moves easily from room to room or from a vehicle to a job site. It may be practical for household repairs and outdoor maintenance. Runtime varies with battery platform, battery condition, blade sharpness, material, and pressure. Cutting dense wood, metal, or mixed demolition material can consume more energy than light trimming. If you expect sustained work, consider whether you already own compatible batteries and whether a spare is useful.

Check the package contents. Some listings sell only the bare tool, while others include batteries, charger, case, or blade assortment. Voltage by itself is not a complete measure of performance. Compare ergonomics, controls, service support, compatibility, and the tasks in your project list.

How to choose a reciprocating saw

Start with the job rather than the specification sheet. Write down the materials you expect to cut, the thickest or toughest regular material, session length, and locations you need to reach. Note whether cuts are indoors, outdoors, near finished surfaces, or close to utilities. This separates must-have features from conveniences.

Power and workload

Manufacturer ratings and platform labels help identify a tool family, but they do not guarantee a cutting rate in every material. Speed depends on the blade, material, blade condition, stroke, shoe contact, and technique. If you will cut often, choose a tool designed for repeated work and look for reviews describing comparable materials and workloads. If your tasks are occasional, a smaller system may be easier to carry and store.

For cordless saws, compare battery availability, charging time, and the cost of a spare. For a corded model, check its power requirements and whether your work area has an appropriate supply. Avoid undersized extension cords or overloaded circuits. Follow the electrical guidance in the manual.

Stroke length and speed

Stroke length describes how far the blade travels during each reciprocating cycle. A longer stroke can move more blade through the cut per cycle, but it may feel more aggressive or harder to control for delicate work. Stroke rate describes how quickly those cycles occur. A variable-speed trigger lets you start slowly and increase speed after the blade engages. Some saws also use a dial or modes to change the response.

Consider these numbers alongside the intended material and blade. A fast setting is not always best. Starting slowly can help position a blade on a mark or reduce sudden movement, while an appropriate steady speed can cut efficiently. Let the blade do the work. Excessive force can bend or break a blade, overheat the tool, and increase the chance that the saw jumps or binds.

Orbital action

Some saws offer an orbital setting that gives the blade an elliptical path. It can help move through some wood cuts more quickly, but the cut may be rougher and movement more aggressive. Orbital action is generally less suitable for controlled cuts in metal, pipe, or finish-sensitive material. Settings vary, so consult the manual.

Think about whether you will use the setting. Multiple modes are not automatically better if controls are hard to read or you often forget which setting is active. For mixed-material demolition, a predictable non-orbital setting may be easier to control.

Vibration and control

Reciprocating motion creates vibration. Some saws include mechanisms intended to reduce it, but comfort still depends on tool, blade, material, and duration. If possible, hold a display model in a normal stance. Evaluate grip texture, handle size, balance, trigger access, and whether the front housing offers a secure place for a second hand. A heavier saw may feel stable in some cuts but tiring overhead.

Vibration control matters because fatigue can undermine technique. Plan breaks during longer sessions and stop if your grip, posture, or attention deteriorates. Do not compensate for a vibrating or unsupported saw by squeezing harder or leaning into it. Check that the blade is straight, the shoe is positioned correctly, and the workpiece is secure.

Adjustable shoe

The shoe is the contact surface around the blade. It helps brace the tool against material and can limit how much blade is exposed. Some shoes pivot, extend, or adjust without tools. An adjustable shoe can help use a different portion of the teeth and improve access. Confirm the adjustment locks securely and does not loosen during a cut.

A shoe is useful only when it can rest against a stable surface without trapping the blade or contacting a hidden hazard. Do not use it as a lever to pry material unless the maker specifically permits that use. The blade can break if twisted sideways under load.

Blade clamp and changes

Many saws use a tool-free blade clamp, though the mechanism varies. Check how it releases, what shank types it accepts, and whether a blade remains firmly retained. A tool-free clamp can simplify changes, but it still needs to lock completely. Disconnect power before installing or removing a blade, and confirm it is seated in the orientation specified by the manufacturer.

Compatibility is not universal across every clamp. Check the saw manual and blade package for shank type and restrictions. If you switch among wood, metal, and pruning blades, an accessible and reliable clamp is useful. Keep hands away from teeth and store blades in a case or sleeve.

Weight, balance, and ergonomics

Weight affects portability, but balance may matter just as much. A front-heavy saw can be tiring when held away from the body. A tool that feels comfortable in a horizontal cut may be awkward overhead. Consider strength, reach, hand size, and work conditions. If you cannot hold a tool steady in a safe stance, reset the task or choose another method.

Read listings to distinguish bare-tool weight from weight with battery. Compare handle angles and grip positions. An ergonomic label is not a substitute for trying the grip or reviewing the manual.

Dust and visibility

A reciprocating saw rarely has an enclosed cutting area. Dust and chips can travel toward the operator, especially in drywall, wood, and composites. Use appropriate eye and respiratory protection for the material and environment. If cutting indoors, plan containment and cleanup. Keep the blade path visible with lighting that reveals the mark without glare.

For demolition, dust is only one concern. Old coatings, insulation, treated lumber, and unknown materials may require special handling. Identify the material before cutting and use appropriate local guidance for hazardous substances. A dust mask does not make an unknown substance safe to cut.

Choosing the right reciprocating saw blade

The blade often has more influence on a cut than shoppers expect. It needs to match material, thickness, and the desired balance between speed and control. Wood blades have different tooth spacing and geometry from blades for metal. Multi-material blades can help with mixed demolition, but they are not universal. Read the blade description and restrictions.

Wood and pruning blades

Wood blades commonly have larger, more widely spaced teeth than fine metal-cutting blades. A coarse blade may clear chips quickly in suitable wood, while a finer pattern can give more control in thinner stock or when a neater edge is wanted. Pruning blades are made for branches and may use patterns suited to green wood. They do not turn a reciprocating saw into a pole saw: you still need safe access and controlled reach.

Do not cut branches that can roll, swing, or pinch the blade. Secure material where practical and plan where the offcut will fall. Avoid cutting above shoulder height or from a ladder when that makes the tool hard to control. A reciprocating saw can bind when a branch closes on the blade, so consider tension and support before starting.

Metal blades

Metal-cutting blades generally use smaller teeth and are designed for the metal thickness and type described on the package. A blade suited to thin sheet may not suit pipe or thick fasteners. For metal, keep enough teeth engaged and use a steady feed. A blade that is too coarse can snag thin stock; one that is too fine may cut slowly or heat up in thick stock.

Secure metal firmly. Loose sheet, pipe, or angle stock can vibrate, whip, or grab the blade. Wear eye protection and account for hot chips and sharp edges. Do not cut pressurized, energized, or unknown lines. Confirm what a pipe contains and isolate equipment before cutting. If the material or service is uncertain, stop and get qualified help.

Blade length and flexibility

Long blades can reach through thick material or behind a surface, but more exposed length can flex. A shorter blade may feel more controlled where there is enough reach. Choose a blade long enough to pass through the work without allowing the tip to strike hidden objects. A blade can bend if pushed sideways, used as a pry bar, or forced into an obstructed cut.

Choose length based on the planned cut, not only the thickest object you might encounter. In wall demolition, a long blade can reach utilities or framing you cannot see. Before a blind cut, inspect the other side and use a depth-limiting approach where appropriate. More reach also means more responsibility to understand what lies behind the surface.

Teeth per inch and cut quality

Teeth per inch is one guide to cutting pattern. Lower counts are often associated with faster, rougher cuts in thicker materials, while higher counts can suit thinner material and finer control. Blade design, tooth shape, material, feed rate, and sharpness all matter. Follow the blade maker’s recommendations for the stock.

Keep a small assortment of clearly labeled blades if you work with multiple materials. Store them dry and inspect for missing teeth, cracks, bends, or heavy wear. Replace a damaged blade. A dull blade encourages extra pressure, which can make control harder and increase heat. Do not continue using a blade simply because it still moves.

Safe setup before every cut

Read and follow the saw’s full operating and safety instructions. Wear eye protection, hearing protection, and material-appropriate respiratory protection. Tie back long hair and secure loose clothing and jewelry. Keep hands away from the blade path and bystanders clear. Use the saw only when alert and able to maintain a stable stance.

  1. Inspect the tool. Check the cord or battery, blade, clamp, shoe, switch, and housing. Do not operate a damaged tool or blade.
  2. Disconnect before changes. Remove the battery or unplug the saw before replacing a blade, adjusting the shoe, clearing a jam, or performing maintenance.
  3. Identify the material. Confirm what you are cutting and whether it contains nails, wiring, pipe, fasteners, coatings, or other hazards.
  4. Inspect beyond the cut. Know what lies behind and around the surface. Detection tools can help but have limits.
  5. Secure the workpiece. Clamp or support it so it cannot shift, roll, or vibrate into the blade. Do not hold a loose piece close to the cut.
  6. Choose the blade. Match material, tooth pattern, length, and shank to the work and saw.
  7. Set a stable stance. Keep feet balanced, hands in approved positions, and the cord away from the cutting path.
  8. Plan the offcut. Make sure the removed piece can fall or be supported without pinching the blade or hitting anyone.

Do not cut a wall, floor, or ceiling blindly. Electrical wiring and plumbing can run in unexpected places, and the blade can reach deeper than you can see. Turn off and verify power or water where appropriate. Never cut gas lines or unknown services. Structural elements may require a professional assessment before removal.

How to make a controlled cut

Start with the shoe braced against the work when the setup permits. Use the blade and speed recommended for the material. Begin with a controlled trigger pull so the blade does not skate. Once the teeth have a stable starting point, increase speed as needed and allow the blade to cut without forcing it. Keep the tool aligned and avoid twisting the blade sideways.

When cutting pipe, secure it against movement and support both sides as appropriate. Avoid a setup where the cut closes and pinches the blade. When cutting a board, support it so it does not sag and bind. If a blade stalls, release the trigger and wait for the tool to stop before changing the setup. Do not pull a moving blade out of a kerf by levering the tool.

For a plunge cut, use only a method approved by the manufacturer and only when material, blade, and surrounding space are suitable. A plunge can cause sudden movement if the blade catches. An inspection hole or a different method may be safer. Never plunge into an unknown wall cavity where wires or pipes may be hidden.

Using a reciprocating saw for common tasks

Demolition and remodeling

Demolition is where a reciprocating saw is most associated, but sequence matters. Remove finish materials and inspect framing before cutting. Identify load-bearing members, wiring, plumbing, gas, and ventilation. When the task involves a structural wall, consult a qualified professional. Use a blade that can handle wood with embedded fasteners when that is the planned material, and keep the shoe supported to reduce jumping.

Cut in short, observable sections when possible. This lets you see how material is held and reduces the chance of a large section dropping unexpectedly. Keep others outside the fall zone and use temporary support if a piece could shift. A reciprocating saw can cut quickly, so it can also create an unsafe situation quickly if no one has planned where material will move.

Plumbing and pipe work

A reciprocating saw can shorten accessible pipe or remove a fixture when fitted with an appropriate blade. Shut off and drain the system as needed, verify what the pipe carries, and support the section. Use a blade suitable for the pipe material and thickness. After cutting, remove burrs with the correct deburring tool and protect open pipe from debris. Do not cut pipe that may contain pressurized, hot, corrosive, or hazardous fluid.

Wood and fasteners

During repairs, the saw can cut a board near a wall or sever fasteners that are difficult to reach. Choose a blade that matches the combination of wood and metal. Avoid pushing into hidden areas without inspection. If the cut is exposed and appearance matters, finish the edge with a suitable tool. For accurate crosscuts, a miter saw may be better than a reciprocating saw.

Outdoor pruning

A reciprocating saw fitted with a pruning blade can remove some branches, but you must reach the branch safely and control its movement. Do not cut from an unstable ladder, lean over a drop, or work near power lines. Branches can spring, roll, or fall unexpectedly. For higher limbs, use equipment designed for reach and a safe position; see our guide to pole saws for tree trimming. For larger ground-level wood, compare a battery chainsaw and its safety requirements.

Features that may help

Variable-speed trigger

A variable-speed trigger gives more control during startup and lets you adjust cutting speed. A useful trigger should be easy to modulate while maintaining a secure grip. A trigger lock may reduce finger fatigue in some approved tasks, but it should never make stopping difficult. Learn the controls before cutting, and release the trigger when repositioning the work.

Tool-free shoe adjustment

A tool-free shoe can make it easier to change blade exposure or use another section of the teeth. Confirm that it locks firmly. Loose movement at the shoe can affect control, so inspect it before each session. A pivoting shoe can help some cuts but should not be used to pry material unless the manual expressly allows it.

Vibration reduction

Vibration-reduction mechanisms can improve comfort, but no system eliminates vibration. Compare handling, weight, and balance where possible. Use a sharp blade, support the saw, and take breaks. A feature that reduces vibration does not replace hearing protection or safe technique.

LED light and blade storage

An LED can illuminate a cut in a cabinet, basement, or dim space. It cannot reveal hidden utilities. Integrated blade storage is convenient if it keeps blades secure and separated from delicate surfaces. Check that stored blades cannot fall into the work area or be touched accidentally.

Common buying mistakes

Assuming more power fixes poor technique

A stronger tool does not make an unsupported cut safe. If a blade binds, the material moves, or the shoe is not braced, extra power can increase sudden movement. Select a tool for the workload, but prioritize setup, blade choice, and control.

Using one blade for every task

A blade that cuts framing lumber may perform poorly in thin sheet metal, pipe, or green branches. Mixed-material blades help with some demolition but are not universal. Read the package and match the blade to the material. Stop if it heats, binds, wanders, or produces an unexpected cut.

Choosing by battery voltage alone

Battery voltage is one aspect of a cordless system, not a complete performance rating. Capacity, cell condition, motor design, blade, and workload influence use. Compare package contents, compatibility, runtime expectations, weight, and replacements.

Buying a compact saw for heavy demolition

A compact model is easy to carry but can be tiring or less controlled in prolonged heavy cutting. A full-size saw may be cumbersome in a confined area. Consider the typical task and your ability to hold the saw safely. Do not assume a one-handed design is ideal in every position.

Forgetting consumables

Blades wear and may need to be changed several times during a project. Include blade costs, a storage case, batteries, and charger in the budget. A starter blade is not necessarily suited to every material. Verify compatibility before purchasing packs.

Care and maintenance

Disconnect the saw from power before cleaning, inspecting, or changing blades. Remove dust from vents and around the shoe with a method approved by the manufacturer. Keep liquid and compressed debris out of the motor and battery contacts. Keep the clamp clean enough to engage fully and inspect the cord, battery, housing, and switches.

Check that the shoe is secure, the clamp retains the blade, and the trigger returns correctly. Replace bent, cracked, or damaged blades. Store blades dry in a sleeve or case; do not leave teeth exposed in a toolbox. Follow the manual for lubrication and service. If the saw vibrates unusually, smells hot, sparks excessively, loses power, or makes an unfamiliar noise, stop using it and have it checked by a qualified provider.

After each use, remove the battery or unplug the tool before clearing debris. Allow a hot blade to cool before handling. Keep the saw dry and store it so the trigger cannot be pressed accidentally. A clean, protected tool is easier to inspect and less likely to surprise you when the next project begins.

When to use another tool

A reciprocating saw is a rough-cutting tool, not a universal substitute for specialized equipment. A circular saw, track saw, or table saw may make straighter, more repeatable cuts in sheet material or long boards. A miter saw is usually better for accurate crosscuts. A jigsaw can offer more control for some curved cuts in thin panels. A dedicated pruning saw or chainsaw may suit outdoor jobs better. Use the tool designed for the cut, material, and location.

Sometimes a hand tool is safer or more precise than a power saw, especially for small parts or near delicate surfaces. Our hand saw guide focuses on garden tools; for carpentry, select a woodworking hand saw designed for the task. Do not use garden tools or reciprocating blades outside their intended material and cutting method.

Frequently asked questions

What is a reciprocating saw best used for?

It is useful for rough cutting, demolition, removal work, pipe cutting, and some pruning when material is secure and the blade is appropriate. It is valued for access and versatility rather than a fine finish. For precision trim, long ripping cuts, or large panels, another saw may fit better.

Is a corded or cordless reciprocating saw better?

A corded model provides continuous power near a suitable outlet but restricts movement. A cordless model is easier to carry and position away from outlets, though runtime depends on battery and workload. Choose based on where you work, session length, and whether you already own a compatible battery platform.

Can a reciprocating saw cut metal?

It can cut some metal when the saw maker permits the material and the blade is intended for it. Secure the workpiece, select a suitable tooth pattern, use controlled speed, and wear eye protection. Do not cut energized, pressurized, or unidentified lines.

What blade should I use for demolition?

Use a blade intended for the materials you expect to encounter. A demolition or mixed-material blade may be designed for wood with fasteners, but it still has limits. If work includes metal, pipe, or other materials, check blade guidance. Inspect the area because a demolition blade can reach hidden hazards quickly.

Can I use a reciprocating saw to trim tree branches?

A pruning blade can cut some accessible branches, but only when you can keep stable footing and control where the branch moves. Avoid overhead or ladder work that makes the tool difficult to control, and stay clear of electrical lines. A pole saw or qualified arborist may be safer for high or large limbs.

Why does my reciprocating saw blade bend?

A blade can bend when forced too hard, twisted sideways, too long for the cut, dull, unsupported, or pinched by moving material. Stop the saw, disconnect power, and inspect the setup. Replace a damaged blade and correct support before continuing. Do not straighten and reuse a bent blade.

Can a reciprocating saw make a plunge cut?

Some models and blades permit plunge cutting in suitable material, but it can cause sudden movement. Follow the saw maker’s method, verify what lies behind the surface, and use a stable stance. Do not plunge into a wall or floor blindly. If you cannot confirm the area is clear, use an inspection opening or another method.

How do I reduce vibration?

Use a sharp blade that suits the material, brace the shoe when possible, secure the workpiece, and avoid excessive pressure. Consider a tool designed with vibration control and take breaks during longer sessions. If vibration suddenly increases, stop and inspect the blade, clamp, and work setup.

Final thoughts

The best reciprocating saws combine enough capability for your workload with a shape, grip, and control system you can use safely. Match the saw to materials and locations, then compare corded and cordless power, size, stroke behavior, vibration, shoe adjustment, and blade compatibility. For many homeowners, versatility and straightforward controls matter more than the highest specification on a product page.

Blades are a major part of the system. Keep suitable wood, metal, and pruning blades available if those tasks are part of your work, and replace damaged or dull blades. Before every cut, identify the material and hazards, support the work, plan where the offcut will go, and inspect behind the cut when possible. Use the saw only within the manufacturer’s instructions. That approach helps the tool do its best work while reducing the risk of a rushed or uncontrolled cut.