Best Lightweight Chainsaws
The best lightweight chainsaw is a saw whose complete operating setup you can control comfortably for the work you need to do. Weight by itself does not make a chainsaw safe or suitable: a short-bar saw may be easier to carry, but it may not handle your wood; a powerful saw may be manageable when properly balanced, while a lighter but poorly balanced model can still cause fatigue. Compare the saw with its bar, chain, battery or fuel, and fluids installed, then check what the manufacturer says about the intended work.
This guide focuses on chainsaws chosen for manageable weight across battery, electric, and gas categories. It is distinct from our general chainsaw guide and battery chainsaw guide: here the central selection issue is how to compare weight, balance, bar length, and practical workload across power systems. For a narrow yard task, also see our mini chainsaw guide; for overhead reach, see pole saws for tree trimming. A chainsaw should not be used above shoulder height or from a ladder.
Affiliate disclosure: DailyHomeDecorating.com may earn a commission if you buy through affiliate links, at no extra cost to you. This guide uses manufacturer documentation and safety sources; it does not claim hands-on testing or a universal weight winner.
Amazon product examples to compare

ASIN: B0D1GXMQRJ

ASIN: B0D1GYKGT8

ASIN: B07G5PVFKN

ASIN: B07781633N
Certain content that appears on this site comes from Amazon. This content is provided “as is” and is subject to change or removal at any time. Product examples and images are supplied through Amazon Creators API; confirm specifications and availability on the current listing.
Quick answer: compare complete saw weight, not the headline number
When comparing models, make sure the quoted weights use the same convention. Gas saws are often listed as powerhead weight without the guide bar, chain, fuel, or bar oil. Battery saws may be listed with or without a battery, and a kit can include a pack that changes the balance. A lighter bare-tool figure does not automatically mean a lighter ready-to-cut saw.
Next, match the saw to the work: small branches and occasional cleanup require a different combination of bar, chain, and power than bucking larger logs or cutting firewood. Choose only a saw that the maker approves for the material and workload. If repeated cuts are causing fatigue, take breaks and reassess your stance, sharpness, support, and training rather than relying on weight alone.
What chainsaw weight actually means
Powerhead weight versus operating weight
Powerhead weight usually refers to the saw body without its cutting attachment. Depending on the manufacturer, it may also exclude fuel, chain oil, and the bar and chain. Battery-saw listings may quote bare-tool weight, weight with a specific battery, or shipping weight. Those figures answer different questions and should not be compared as though they were measured the same way.
For a useful comparison, record four numbers if available: bare powerhead or tool weight; cutting attachment weight; battery or fuel load; and complete ready-to-cut weight. If the maker does not publish a complete figure, ask its support team or compare the supplied component weights carefully. Avoid adding estimates as if they were official specifications. Two models can only be fairly compared when their configurations and measuring conventions match.
Ready-to-cut weight changes as a gas saw consumes fuel or a battery pack is replaced. A larger battery can extend work time but increase total mass. A longer bar and chain add weight at the front and can alter how the saw feels more than a similar amount of weight close to the handle. A shoulder-friendly purchase is therefore about both mass and balance.
Balance and perceived fatigue
How a saw feels depends on the center of mass, handle positions, grip size, vibration, and the cutting posture. A front-heavy saw can make the arms work harder to keep the bar level. A heavy battery behind the handle might balance a front motor on one model but feel awkward on another. Handle spacing and shape also affect leverage and wrist position.
If possible, hold the exact configuration with its battery and cutting attachment installed. Keep the chain brake engaged and follow store safety rules; do not start a saw indoors or without proper authorization. A brief static hold cannot reproduce the fatigue of cutting, but it can reveal poor grip fit, uncomfortable handle spacing, or a balance point that feels wrong for you.
Why lighter is not always better
A lighter saw can be easier to carry and reposition, but it may have a smaller bar, less cutting capacity, or a workload limit. A longer bar may reach farther around a log but adds leverage and can make the tool harder to control. A compact saw may be ideal for small, grounded branches yet unsuitable for larger material. The right choice is the lightest saw that still fits the job safely and within its approved use.
Chainsaw work carries serious injury risks regardless of saw weight. Reduced mass is not a substitute for training, protective equipment, chain-brake function, sharp chain, secure footing, or safe cutting practices. Never choose a top-handle arborist saw simply because it appears smaller or lighter; top-handle saws are intended for trained professional tree-care use under specific conditions.
Battery, corded, and gas saw tradeoffs
Battery chainsaws
Battery saws avoid fuel mixing and can be quieter than many gas models at the tool, though hearing protection and local noise rules still matter. They need a compatible battery and charger, and pack size affects weight and balance. A bare-tool listing can look especially light while the ready-to-use configuration is materially heavier. Compare the exact pack included in the kit and any additional battery you expect to carry.
Battery capacity and saw runtime depend on wood diameter and hardness, chain sharpness, temperature, and cutting method. Do not treat a maker’s cut-count or runtime estimate as guaranteed for every task. A spare battery helps only if it is compatible, charged, and stored according to the maker’s instructions. For extended sessions, include the battery rotation plan in the weight and cost comparison.
Battery units vary from small pruning saws to full-size rear-handle models. Consider the intended classification and manual, not merely the battery voltage. A small top-handle battery chainsaw is not a toy and is not made safe for inexperienced users by having a modest bar. Use it only for approved work, with the specified safety equipment and training.
Corded electric chainsaws
Corded electric models can be relevant when work happens close to a reliable outlet and extension-cord routing is manageable. They avoid carrying a battery pack or fuel, but the cord can snag, be cut, or limit access. The complete setup includes the saw and an appropriately rated cord, with the cord managed away from the cutting path. Verify whether the saw is rated for the extension cord and outdoor use.
Weight comparisons should distinguish the saw alone from the system you must move. A cord does not sit on the saw while cutting, but it adds handling and planning. If the work moves around a yard or occurs far from an outlet, a cord may negate the convenience of a lighter tool body. Corded models are also subject to their own bar, chain, and workload specifications.
Gas chainsaws
Gas saws do not require a battery or electrical cord, making them useful in remote locations and for sustained cutting when selected appropriately. Their operating weight includes the bar, chain, fuel, and chain oil, while manufacturers often list only dry powerhead weight. Fueling, starting, engine maintenance, exhaust, and noise are part of ownership. A gas saw may have a compact powerhead but weigh more once configured for work.
Small homeowner gas models can be considered for light ground-level work within manufacturer limits. Engine displacement or horsepower alone does not tell you whether a particular saw will feel manageable. Check vibration data if provided, the model’s bar options, chain-brake and guard features, and the complete fuelled setup. Follow fuel storage and starting instructions carefully.
Match power source to the work location
For short, nearby tasks, the lightest practical battery or corded configuration may be convenient. For remote work, gas or battery systems with sufficient runtime may make more sense. For long continuous work, evaluate spare batteries, refueling needs, charging access, and rest breaks. If no configuration is comfortable and adequately rated, hire a qualified professional rather than moving up to a larger saw without training.
Bar length, balance, and workload
Guide-bar length influences reach, weight distribution, and which cuts can be attempted. A longer bar can handle a larger diameter within the model’s approved capacity, but it also adds leverage, can make the saw more front-heavy, and increases the importance of controlling the tip. A shorter bar may feel more maneuverable for small wood but cannot safely substitute for capacity the saw does not have.
Use the bar length recommended for the exact model. Some saws have only a limited approved range, and switching to a longer bar can exceed motor capability or change kickback behavior. Confirm bar and chain compatibility, pitch, gauge, drive links, and chain type with the manufacturer. Do not modify the saw to fit a longer attachment just because the mounting pattern appears to match.
Branch cleanup and small-diameter wood
For branches already on the ground and small logs, a compact rear-handle saw may be more manageable than a large saw, if the maker approves the task. Support material so it cannot roll or pinch the bar. Remove small branches with a hand pruner where that is safer and easier. Do not cut branches overhead with a handheld chainsaw; use an appropriate pole tool from the ground or a qualified arborist.
Firewood and bucking
Firewood cutting involves heavier wood, repeated cuts, and changing tension in logs. The saw must be sized for the diameter and species, and the operator must understand how to prevent pinching, kickback, and log movement. A lightweight model may suit occasional smaller rounds but can struggle with larger hardwood or sustained use. Keep logs stable on a proper support and maintain clear footing.
Felling and storm cleanup
Felling trees and cutting storm-damaged limbs are not ordinary light yard tasks. Tensioned or suspended wood can move unpredictably; overhead limbs, power lines, and unstable trees add severe hazards. A lower-weight saw does not make these jobs appropriate for an untrained operator. Contact an insured tree-care professional, especially near structures, traffic, utility lines, or damaged trees.
Features that affect handling and control
- Handle layout: rear-handle saws are the normal format for ground-level operation. Top-handle models are designed for trained tree-care professionals and should not be chosen as light homeowner alternatives.
- Vibration: lower vibration can affect comfort over time, but compare manufacturer data using the same test conventions and consider that gloves, chain condition, and grip influence the experience.
- Chain brake and hand guard: verify that the brake is present and functioning as specified. A brake does not prevent every kickback injury and must be maintained.
- Balance with battery: compare the exact pack size, since a high-capacity pack can shift the saw’s balance.
- Tool-free tensioning: may make adjustment convenient, but correct chain tension still requires following the manual and checking a cool chain as instructed.
- Automatic oiling and reservoir access: affect routine handling and maintenance. Check oil level and use only the lubricant recommended by the manufacturer.
- Low-kickback bar and chain: compatible reduced-kickback components may reduce risk under specified conditions but do not remove kickback hazards or training needs.
- Battery indicator or fuel visibility: helps plan work but does not replace inspecting charge, oil, fuel, and equipment before starting.
Match a lightweight chainsaw to the task
For occasional pruning from the ground, a manual pruning saw may be lighter and easier to control than a powered chainsaw. A cordless pruning saw can be useful for small branches already within safe reach, but it still has a moving chain and requires protective equipment. For larger branches at height, a pole saw can extend reach while the operator remains on the ground, subject to the pole saw’s limits and overhead hazards.
For cutting small firewood, compare compact gas and battery rear-handle saws by ready-to-cut weight, bar length, chain speed, and runtime. Consider whether the wood is clean, stable, and within the manual’s cut capacity. For larger logs, choose equipment and training appropriate to that workload; do not assume repeated cuts with a small saw will be safe simply because it is easier to lift.
For occasional cleanup after a storm, stop and assess the scene before bringing a saw near branches under tension, unstable trunks, or electrical wires. A tree under stress can move or release energy as it is cut. Keep clear of downed power lines and report them to the utility. Let trained professionals handle hanging limbs and complex failures.
For remote trail or property work, weigh the saw, fuel or battery, spare chain, bar oil, tools, and PPE as one kit. Lightweight equipment can improve portability, but each added battery and protective item changes the load. A hand saw may be appropriate for small deadwood where legally permitted, while larger work may call for a professional crew.
Buying framework for a lightweight chainsaw
- Define the job. List the typical wood diameter, species, task type, location, and frequency. Separate small grounded cleanup from firewood, felling, or overhead work.
- Choose a safe form factor. For homeowner ground work, compare rear-handle saws. Treat top-handle saws as professional tree-care equipment requiring specific training.
- Normalize weight figures. Compare powerhead-to-powerhead or complete-to-complete. Add bar, chain, battery or fuel, and fluids as specified by the maker; do not mix shipping and working weights.
- Check balance, not just mass. Consider battery placement, handle geometry, bar length, and your ability to maintain control in the intended stance.
- Verify bar compatibility. Use only bar and chain combinations approved for the model, including pitch, gauge, and drive-link count.
- Assess safety equipment. Confirm a functional chain brake, guards, trigger lockout, and recommended low-kickback components, then budget for PPE and training.
- Plan the power source. Account for battery and charger, spare packs, fuel, extension cords, charging or refueling access, noise, and maintenance.
- Compare supported service. Check parts, chain and bar availability, warranty, dealer or repair access, and manuals before buying.
- Be realistic about workload. If the task exceeds the saw’s rating or your training, select a professional service instead of buying a larger saw.
Manufacturer examples and weight conventions
Official manufacturer documentation illustrates why weight labels need context. Makita’s XCU06Z product page lists both weight without the battery and weight with a battery, as well as its guide-bar length and handle type. This provides a useful example of how pack configuration changes a cordless chainsaw’s published mass. Makita describes this model as a top-handle saw for professional tree care, so it should not be interpreted as a recommendation for untrained homeowners.
Husqvarna’s 120 Mark II support page lists weight excluding cutting equipment, while its product description positions the saw for light homeowner tasks. STIHL’s MS 170/MS 180 manual gives dry weight without bar and chain. These manufacturer conventions make direct comparisons difficult unless the bar, chain, fuel, and battery are included consistently. We do not rank these example saws by weight or claim that one is the lightest in the market.
Research method and primary sources
This guide uses manufacturer product pages, manuals, and official safety guidance to explain selection criteria. It does not include hands-on testing, measured fatigue comparisons, or independently measured operating weights. Product lines and specifications can change; confirm the exact regional configuration and current manual before purchase. The best product for an individual depends on work, training, and safe handling, not on weight alone.
Primary sources reviewed: Makita’s XCU06Z product page and XCU05/XCU06 instruction manual; Husqvarna’s 120 Mark II support and specifications; STIHL’s MS 170/MS 180 owner’s manual and Chainsaw Safety Manual; and OSHA’s Chainsaw Safety QuickCard and Working Safely with Chainsaws fact sheet.
Safety and operating limits
A lightweight chainsaw can still cause catastrophic injury. Read the exact operator manual, complete appropriate training, and use the specified personal protective equipment. OSHA identifies head, hearing, eye/face, footwear, leg, and hand protection for workplace chainsaw use; requirements can differ by task and jurisdiction. Use chainsaw-rated leg protection and footwear where required, eye and face protection, hearing protection, gloves, and head protection appropriate to the work.
Before each use, inspect the chain brake, throttle lockout, chain catcher, handles, bar, chain, and oiling system. Do not operate with missing or damaged safety devices. Maintain sharp chain tension according to the maker’s procedure. Engage the brake when carrying the saw, shut it down before adjustments, and keep the chain away from your body and bystanders.
Maintain two-handed control on a rear-handle saw, secure footing, and a clear retreat path. Do not operate from a ladder, above shoulder height, or one-handed. Do not use the bar tip to cut. Kickback can occur when the upper quadrant of the bar nose contacts an object or the chain is pinched; a chain brake and reduced-kickback equipment reduce some risks but cannot eliminate them. Avoid cutting near power lines, under tensioned limbs, or on unstable ground.
For a small branch, a hand pruner or pruning saw may be safer. For elevated limbs, consider a pole saw from the ground, only within its instructions and clear of utilities. If a tree is leaning, damaged, hung up, or near a structure, hire a qualified arborist. Never choose a chainsaw based on low weight as a reason to attempt work beyond your training.
Maintenance that helps a saw remain manageable
A dull chain increases cutting effort and can make the operator push harder, adding fatigue and reducing control. Inspect and sharpen the chain at the intervals in the manual, or have it serviced by a qualified professional. Keep the chain correctly tensioned and lubricated. Use the specified bar oil and check the reservoir before work.
Clean chips from the sprocket cover, cooling areas, and oil passages as directed. Check that the bar groove and oil holes are clear. Rotate or service the bar as the manufacturer recommends. For battery saws, inspect the pack and charger and store them within the specified temperature range; for gas saws, use the correct fuel mixture and storage procedure. Never pressure-wash a saw unless its manufacturer allows it.
Replace damaged bars, chains, guards, or handles with approved parts. Keep the chain brake and safety controls in working order. Store the saw with the chain cover installed, battery removed or fuel handled as specified, and the tool inaccessible to children. A well-maintained saw is easier to operate within its intended performance, but maintenance does not replace training or protective equipment.
Frequently asked questions
What is considered a lightweight chainsaw?
There is no universal cutoff because makers list weights differently and configurations vary. Compare complete ready-to-cut weight with the same bar length and power source. A bare powerhead weight should not be compared directly with a battery saw weighed with its pack installed.
Are battery chainsaws lighter than gas chainsaws?
It depends on the models and what the published figures include. A battery pack adds weight to a bare tool, while gas saw weights may exclude bar, chain, fuel, and oil. Compare the complete operating setup and the balance you feel in hand rather than relying on the power-source label.
Is a shorter bar better for a lightweight chainsaw?
A shorter bar can reduce front-end weight and suit smaller material, but it limits reach and cutting capacity. Use only the bar lengths approved for the model and match them to the work. A short bar does not make a saw appropriate for overhead or one-handed use.
Can beginners use a top-handle chainsaw?
Top-handle saws are designed for trained professional arborists and are not a lightweight substitute for a rear-handle homeowner saw. Do not use one without the required professional training, equipment, and work positioning.
Does lighter weight reduce kickback risk?
No. Kickback risk depends on contact, pinching, bar and chain configuration, speed, technique, and other factors. A lighter saw can still kick back forcefully. Use proper training, compatible low-kickback components, a functioning brake, and safe cutting technique.
Should I choose a gas or battery saw for occasional yard work?
Compare the exact workload, complete weight, maintenance, noise, runtime, and access to charging or fuel. Battery can simplify starting and maintenance, while gas can suit remote or sustained work. Neither power source is automatically the safer or lighter choice.
Can I cut large logs with a small lightweight saw?
Only if the saw’s manufacturer approves the bar and material capacity and you have the training and setup for that cut. A small saw may bind or overheat if pushed beyond its intended workload. If the log is too large, unstable, or under tension, use a professional service.
What is the lightest chainsaw on the market?
Product lines and measurement methods change, and there is no meaningful answer without defining whether the battery, bar, chain, fuel, and oil are included. Compare current manufacturer specifications for the exact configuration you would operate.
Can a pole saw replace a lightweight chainsaw?
A pole saw can help reach some branches from the ground, but it is designed for a different task and has its own limits. It does not replace a rear-handle chainsaw for bucking logs, and it still requires safe clearance, stable footing, and compliance with the manual.
How can I reduce fatigue while using a chainsaw?
Choose a suitable saw and bar, keep the chain sharp, maintain a balanced stance, support the wood, and take breaks. Do not reach or twist to compensate for an awkward setup. Stop if you become tired or lose control; fatigue can increase risk regardless of equipment weight.
Compare chainsaws by complete operating weight, balance, workload, bar compatibility, and safety requirements. The lightest tool is useful only when it is approved for the job and remains controllable throughout the work.